Depac Double-Acting Cartridge Mechanical Seal Type 321 322 323 326 365 API Mechanical Seals 380 385 Agitator Seals Type 370 Metal Bellow Seals Type 201 170 186

• Pressure: High Pressure Mechanical Seals
• Speed: High-Speed Mechanical Seal
• Temperature: Temperature Mechanical Seal
• Performance: Temperature
• Standard: Standard
• Type: HU1
• Model NO.: DEPAC Mechanical Seal
• Balance: Balanced
• Stationary Ring: Tc, Silicon Carbide
• Rotary Ring: Carbon, Silicon Carbide, Tc
• Secondary Seal: NBR, EPDM, Vit
• Spring and Metal Parts: Steel
• Transport Package: as Requirement
• Specification: As Requirement
• Trademark: BE
• Origin: Zhejiang
• HS Code: 8484200090
• Production Capacity: 1000000/Month

Product Description

Depac Double-Acting Cartridge Mechanical Seal Type 321 322 323 326 365 API Mechanical Seals 380 385 Agitator Seals Type 370 Metal Bellow Seals Type 201 170 186 196

Mechanical seal Types 321, 322 and 323:

The types 321, 322 and 323 are stationary, tandem-active double cartridge mechanical seals with integrated barrier fluid pumping assistance. The double pressure balancing of the seal faces on the product side ensures one the one hand that the seal faces do not open in case of pressure reversal. and on the other that the balancing for reducing the friction values is present under all pressure conditions.

The respective product versions differ by their seal chamber cross-sections.

• Self-closing in case of pressure reversal
• Venting option
• Cartridge-mounted
• Double balanced
• Tandem active
• Independent of the direction of rotation
• Multiple springs made of Hastelloy C
• Springs outside the medium - no blockage of the springs
• Vibration-dampend stationary face support

Range of application*
Pressure	700 mm Hg - 28 bar
Temp.	Elastomer dependent
Sliding velocity	up to 35 m/s
Shaft movements	axial ≤ Ø 22 +/- 0,5 mm | ≥ Ø 24 +/- 1,0 mm
	radial ≤ Ø 22 +/- 0,4 mm | ≥ Ø 24 +/- 0,5 mm
Sizes
Dshaft	16 - 160 mm
	5/8" - 6 ¼"
	Special sizes available on request
Materials
Metals	DIN 1.4571/Hast. C
Springs	Hast. C
Faces	CA, SC, SSIC, TC
O-Rings	FKM, EPDM, PTFE, FEP Umm., Chemraz, Kalrez, Aflas, etc.

Other sizes, materials or design variations upon request.

Mechanical seal Type 380:

The type 380 is a stationary single-cartridge seal. The mechanical seal was specially optimised to meet the requirements of the petroleum industry. The type 380 is equipped with a so-called "floating" safety seal. As a result, this mechanical seal is also recommended for extreme boundary conditions - from water and highly volatile hydrocarbons to acids and alkalis.

• Cartridge-mounted
• Stationary design principle
• Balanced
• "Floating" safety seal
• Independent of the direction of rotation
• Shock and vibration-dampend faces
• Springs outside the medium

Range of application
Pressure	700 mm Hg - 28 bar
Temp.	depending on Elastomer
Speed	35 m/sec.
Materials
Dshaft	20 - 110 mm
	7/8" - 4 ¼"
Materials
Metals	DIN 1.4571 / 316 SS
Springs	Hast. C
Faces	CA, SC, SSIC, TC (Ni)
O-Rings	FKM, EPDM, PTFE, FEP Umm., Chemraz, Kalrez, Aflas, etc.
Alternatives
Membrane (bellows)	Hast. C
Rolled bellows	Hast. C, Incolloy

Other sizes, materials or design variations upon request.

Mechanical seal Type 385:

The type 385 is a stationary, tandem-active double mechanical seal. Specially designed to meet the requirement of the petroleum industry, the type 385 is equipped with a barrier space with a patented pump construction and barrier fluid diversion.

• Cartridge-mounted
• Stationary design principle
• Double balanced
• Full pressurisation is possible on pump side and barrier side
• Self-closing in case of pressure reversal
• Tandem active
• Independent of the direction of rotation
• Shock and vibration-dampend faces
• "Floating" safety seal

Range of application
Pressure	700 mm Hg, 28 bar
Pressuretabelle Atmosphäre = 0 bar
Medium pressure	Barrier pressure
28 *	0
28	28
0	28
* only for lubricating liquids
Temp.	depending on Elastomer
Speed.	35 m/s
Sizes
Dshaft	20 - 110 mm
	7/8" - 4 ¼"
Materials
Metals	DIN 1.4571 / Hast. C
Springs	Hast. C
Faces	CA, SC, SSIC, TC
O-Rings	FKM, EPDM, PTFE, FEP Umm., Chemraz, Kalrez, Aflas, etc.

Other sizes, materials or design variations upon request.

Agitator cartridges types 370 to 373:

DEPAC has four optimised mechanical seals for the challenging boundary conditions of an agitator. The advantage: the flange and face parts as well as certain seal housing parts are exchangeable. The operator's stock can thus be kept to a low level and a wide range of replacement parts is available.

Type 370
Double mechanical seal with bearing
DIN 28141 flange
DIN 28154 shaft form A - B - C or according to all other standard specifications or customer requirements
Type 371
Single mechanical seal with bearing
Type 372
Double mechanical seal
Type 373
Single mechanical seal

• DIN dimensions, alternatives are possible
• Shock and vibration-dampend faces
• Double balanced
• Full pressure reversability
• Self-closing in case of pressure reversal
• Mirror-image face design
• Independent of the direction of rotation

Mechanical seal Type 201:

 

The type 201 is a stationary, balanced mechanical seal. The mechanical seal is designed for demanding ranges of applications, including hot water and chemical applications. The type 201 seals reliably at temperatures of up to 240 degrees Celsius and a pressure of 20 bar. DEPAC recommends spot-drilling the shafts or sleeves for set screw fastening at pressure loads exceeding 10 bar.

• Stationary mechanical seal design principle
• No scoring of pump shafts/sleeves
• Balanced
• No stepped sleeve required for the balancing
• Shock and vibration-dampend stationary face support
• Independent of the direction of rotation

Range of application
Pressure	20 bar
Temp.	depending on Elastomer
Speed	30 m/s
Sizes
Dshaft	18 - 100 mm
Materials
Metals	DIN 1.4571/Hast. C
Faces	CA, SC, SSIC, TC
O-Rings	FKM, EPDM, PTFE, FEP Umm., Chemraz, Kalrez, Aflas, etc.
Rolled bellows	Hast. C, Incolloy

Other sizes, materials or design variations upon request.

Mechanical seal Types 170 and 170 A:

The types 170 and 170 A are dynamic, non-balanced mechanical seals. This mechanical seal range with elastomer bellows construction is particularly interesting for OEMs and is designed for applications in the most diverse installation spaces.

Type 170
Short overall length
Available in inch and mm dimensions
Type 170A
L1KU installation length

• Rotating unit already preassembled
• Independent of the direction of rotation
• Wide range of applications
• Low costs
• Use with various stationary faces possible
• For short and DIN installation spaces
• No scoring of shaft sleeves

Type 170

Range of application*
Pressure	up to 10 bar
Temp.	Elastomer dependent
Sliding velocity	up to 15 m/s
Maße
Dshaft	10 - 100 mm
	3/8" - 3"
	Special sizes available on request
Materials
Metals	DIN 1.4301, 1.4571
Springs	DIN 1.4310
Faces	CA, SC, SSIC
Rubber Bellows	EPDM, FKM

Other sizes, materials or design variations upon request.

Mechanical seals Type 186:

 

The DEPAC component seal type 186 is a dynamic single seal that has been specially developed as a high-quality replacement for conventional mechanical seals with dynamic O-ring to the shaft. The mechanical seal fits in installation spaces according to DIN 24960 / EN 12756 and can be combined with popular stationary parts. The mechanical seal is characterised by its universal range of uses and is suitable for many applications.

• Balanced
• Independent of the direction of rotation
• Multiple springs made of Hastelloy C
• No scoring of the shaft
• Springs outside the medium - no blockage of the springs
• Combinable with various stationary parts

Range of application*
Pressure	700 mm Hg up to 30 bar
Temp.	Elastomer dependent
Sliding velocity	up to 30 m/s
Shaft movements	axial ≤ Ø 35 +/- 0,5 mm | ≥ Ø 38 +/- 1,0 mm
	radial ≤ Ø 35 +/- 0,5 mm | ≥ Ø 38 +/- 0,5 mm
Sizes
Dshaft	16 - 160 mm
	5/8" - 6 ¼"
	Special sizes available on request
Materials
Metals	DIN 1.4571
Springs	Hast. C
Faces	CA, SC, SSIC, TC
O-Rings	FKM, EPDM, FEP Umm., Chemraz, Kalrez, Aflas, etc.

Other sizes, materials or design variations upon request.

Mechanical seal Type 196:

 

The DEPAC type 196 is a stationary, balanced, single-component seal that was specially developed for installation spaces according to DIN 24960 / EN12756. The stationary design guarantees the best possible running smoothness and entirely rules out scoring of the shaft. The balancing results in lower face friction and thus less wear, which is reflected by an optimisation of the service life.
DEPAC also offers these mechanical seals in larger sizes than the standard sizes indicated in the standard. The mechanical seal can be combined with popular retainers, glands and adapter parts.

• Stationary design principle
• No scoring of the shaft or shaft sleeve
• Fits installation spaces according to DIN 24960 / EN12756
• Balanced
• Independent of the direction of rotation
• Multiple springs made of Hastelloy C
• Springs outside the medium - no blockage of the springs
• No stepped sleeve required for the balancing

Range of application
Pressure	700 mm Hg - 30 bar
Temp.	Elastomer dependent
Sliding velocity	up to 30 m/s
Shaft movements	Wellen-Ø | axial | radial
	≤ Ø 25 | +/- 0,5 mm | +/- 0,25 mm
	≥ Ø 28 ≤ Ø 38 | +/- 0,5 mm | +/- 0,4 mm
	≥ Ø 40 ≤ Ø 48 | +/- 0,5 mm | +/- 0,5 mm
	≥ Ø 50 | +/- 1 mm | +/- 0,5 mm
Sizes
Dshaft	16 - 100 mm
	¾" - 4"
	Special sizes available on request
Materials
Metals	DIN 1.4571/Hast. C
Springs	Hast. C
Faces	CA, CE, SC, SSIC, TC
O-Ringe	FKM, EPDM, PTFE, FEP Umm., Chemraz, Kalrez, Aflas, etc.

Other sizes, materials or design variations upon request.

We offer products and services to a wide range of mechanical seal users across the nation. We supply electric motor and pump repair shops, HVAC contractors, municipalities, utility companies (electric, power and water) and a variety of other distributors.We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly youneed, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.

As Follows:

Our Warehouse

We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .

Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.

To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly you need, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers? 

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components 

5. How long is your delivery time? 

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ? 

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight. 

 

7. what services can we provide? 

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery; 

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY; 

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival