Split Cartridge Mechanical Seal 85mm 105mm 145mm Water Pump Mechanical Shaft Seal

• Structure: Split Cartridge Mechanical Seal
• Pressure: High Pressure Mechanical Seals
• Speed: High-Speed Mechanical Seal
• Temperature: Temperature Mechanical Seal
• Performance: Temperature
• Standard: Standard
• Model NO.: 85mm/105mm/145mm
• Type: HU1
• Balance: Balanced
• Transport Package: as Requirement
• Specification: As Requirement
• Trademark: BE
• Origin: Zhejiang
• HS Code: 8484200090
• Production Capacity: 1000000/Month

Product Description

SPLIT Cartridge Mechanical Seal 85mm 105mm 145mm Water Pump Mechanical Shaft Seal

What is a split mechanical seal?
A mechanical seal is a device used to contain fluid within a vessel where a rotating shaft passes through housing, or sometimes where housing rotates around a shaft.
These vessels are usually pumps, mixers, agitators, etc.
The mechanical seal's purpose is to allow the shaft to rotate freely without allowing large amounts of fluid to escape.
A typical cutaway of a mechanical seal is shown here, with a shaft passing through its center.

When should I use a split mechanical seal?
A common component seal replacement on a split-case pump would require removal of end bearings, motor coupling, and possibly the motor itself.
These extra processes cause increased labor hours and increased down time, which in turn means increased cost.
A split mechanical seal, however, can greatly decrease these deficits.

Common applications for split seals are as follows:

• Equipment with large shaft sizes
• Vertical shaft pumps
• Side-entry mixers & agitators
• Double-suction pumps

These applications benefit from split seals because the equipment they are installed in require large amounts of time for disassembly. The use of split mechanical seals in these applications reduces install time, reduces sleeve wear, increases equipment reliability, and reduces maintenance costs. Due to the increase in initial cost for split mechanical seals it is best to implement them in your system when the savings from the above mentioned benefits outweighs the increase in initial cost. In most cases, the savings can be quite significant.

We offer products and services to a wide range of mechanical seal users across the nation. We supply electric motor and pump repair shops, HVAC contractors, municipalities, utility companies (electric, power and water) and a variety of other distributors.Our seal products have been widely used in different sorts of pumps, including but not limited to chemical pumps, centrifugal pumps, high-temperature oil pumps, clean water pumps, circulating pumps, vacuum pumps, sewage pumps and slurry pumps. Beside for pumps, our seals also work with reaction kettles, submerged motors, compressors, blowers, paper-making equipment, sewage treatment equipment and other rotating machines.

As Follows:

We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .

Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.

To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly you need, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers?

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components

5. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ?

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.

 

7. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival