Spring Energized Seals Hydraulic Shaft Seal SS304 PTFE V-Spring Piston Seal

• Customization: Available
• Material: NBR, FKM, FPM, EPDM
• Usage: Engine, Transmission, Rear Axle
• Model NO.: Spring Energized Seal
• Type: Oil Seal
• Speed: Speed
• Pressure: Pressure Type
• Lip: Lips Type
• Standard: Standard, Nonstandard
• Model Number: Standard
• Hardness: 30-90 Shore
• Temp Range: -35~250
• Casing Type: Rubber Covered
• Series: Cnb
• Feature: High Temperature Resistance
• Application: Aviation, Auto, Track, Motorcycle etc
• Transport Package: as Requirement
• Specification: Follow the instructions
• Trademark: BE
• Origin: China
• HS Code: 4016931000
• Production Capacity: 500000PCS/Month

Product Description

Spring Energized Seals Hydraulic Shaft Seal SS304 Ptfe V-Spring Piston Seal

Description-Spring Energized Seal:

Spring-Loaded Seals
 

In addition to providing excellent sealing performance at low pressure, these seals withstand a wider range of temperatures and chemicals than U-cup seals.
They're also known as spring-energized seals.
They have a sealing lip on both the inside and outside edges, so they can be used for rod and piston sealing.
Pistons require two seals-install one facing in each direction.
 

Note: Maximum performance values cannot be achieved simultaneously;
for example, speed is affected by pressure, temperature, and other operating conditions.
 

Graphite Filled-Graphite-filled seals have greater wear resistance and strength than seals without a filler.

PTFE-PTFE seals withstand a wider range of temperatures and chemicals than UHMW seals.

UHMW Polyethylene-UHMW seals are good for sealing out water and hydraulic fluid in environments where chemicals and high temperatures are not a concern.

	For Rod Sealing	For Piston Sealing
	For Rod Dia.	For Groove Dia.	For Bore Dia.	For Groove Dia.	Max. Speed, ft/sec	Max. Pressure, psi	Temp. Range, ° F	Hardness	Color		Each
UHMW Polyethylene with 302 Stainless Steel Spring
For 0.101" Wide Grooves
1/8"	0.250"	1/4"	0.125"	1.6	250	-320 to 180	Durometer 67D	White	5383N27	$15.04
3/16"	0.313"	5/16"	0.188"	1.6	250	-320 to 180	Durometer 67D	White	5383N26	15.20
1/4"	0.375"	3/8"	0.250"	1.6	250	-320 to 180	Durometer 67D	White	5383N29	17.20
3/8"	0.500"	1/2"	0.375"	1.6	250	-320 to 180	Durometer 67D	White	5383N28	15.68
For 0.149" Wide Grooves
3/16"	0.375"	3/8"	0.188"	1.6	250	-320 to 180	Durometer 67D	White	5383N24	19.36
1/4"	0.438"	7/16"	0.250"	1.6	250	-320 to 180	Durometer 67D	White	5383N23	19.60
3/8"	0.563"	9/16"	0.375"	1.6	250	-320 to 180	Durometer 67D	White	5383N22	20.42
1/2"	0.688"	11/16"	0.500"	1.6	250	-320 to 180	Durometer 67D	White	5383N21	21.72
3/4"	0.938"	15/16"	0.750"	1.6	250	-320 to 180	Durometer 67D	White	5383N19	23.06
For 0.188" Wide Grooves
1/2"	0.750"	3/4"	0.500"	1.6	250	-320 to 180	Durometer 67D	White	5383N11	26.54
3/4"	1.000"	1"	0.750"	1.6	250	-320 to 180	Durometer 67D	White	5383N18	28.92
1"	1.250"	1 1/4"	1.000"	1.6	250	-320 to 180	Durometer 67D	White	5383N17	31.28
1 1/4"	1.500"	1 1/2"	1.250"	1.6	250	-320 to 180	Durometer 67D	White	5383N16	33.64
1 1/2"	1.750"	1 3/4"	1.500"	1.6	250	-320 to 180	Durometer 67D	White	5383N15	36.00
2"	2.250"	2 1/4"	2.000"	1.6	250	-320 to 180	Durometer 67D	White	5383N14	40.72
For 0.268" Wide Grooves
1 1/2"	1.875"	1 7/8"	1.500"	1.6	250	-320 to 180	Durometer 67D	White	5383N13	44.86
2 1/2"	2.875"	2 7/8"	2.500"	1.6	250	-320 to 180	Durometer 67D	White	5383N12	56.04
UHMW Polyethylene with 316 Stainless Steel Spring
For 0.056" Wide Grooves
1/8"	0.188"	3/16"	0.125"	1.6	250	-320 to 180	Durometer 67D	White	5383N25	26.12
PTFE with 302 Stainless Steel Spring
For 0.056" Wide Grooves
1/8"	0.188"	3/16"	0.125"	1.6	250	-320 to 450	Not Rated	White	13125K61	59.50
For 0.101" Wide Grooves
1/8"	0.250"	1/4"	0.125"	1.6	250	-320 to 450	Not Rated	White	13125K63	35.48
3/16"	0.313"	5/16"	0.188"	1.6	250	-320 to 450	Not Rated	White	13125K64	23.64
1/4"	0.375"	3/8"	0.250"	1.6	250	-320 to 450	Not Rated	White	13125K65	25.75
3/8"	0.500"	1/2"	0.375"	1.6	250	-320 to 450	Not Rated	White	13125K66	37.62
For 0.149" Wide Grooves
3/16"	0.375"	3/8"	0.188"	1.6	250	-320 to 450	Not Rated	White	13125K67	31.00
1/4"	0.438"	7/16"	0.250"	1.6	250	-320 to 450	Not Rated	White	13125K68	41.75
3/8"	0.563"	9/16"	0.375"	1.6	250	-320 to 450	Not Rated	White	13125K69	34.62
1/2"	0.688"	11/16"	0.500"	1.6	250	-320 to 450	Not Rated	White	13125K81	36.97
3/4"	0.938"	15/16"	0.750"	1.6	250	-320 to 450	Not Rated	White	13125K82	41.08
For 0.188" Wide Grooves
1/2"	0.750"	3/4"	0.500"	1.6	250	-320 to 450	Not Rated	White	13125K83	50.42
3/4"	1.000"	1"	0.750"	1.6	250	-320 to 450	Not Rated	White	13125K84	76.35
1"	1.250"	1 1/4"	1.000"	1.6	250	-320 to 450	Not Rated	White	13125K85	76.17
1 1/4"	1.500"	1 1/2"	1.250"	1.6	250	-320 to 450	Not Rated	White	13125K86	83.74
1 1/2"	1.750"	1 3/4"	1.500"	1.6	250	-320 to 450	Not Rated	White	13125K11	73.91
2"	2.250"	2 1/4"	2.000"	1.6	250	-320 to 450	Not Rated	White	13125K12	88.49
For 0.268" Wide Grooves
1 1/2"	1.875"	1 7/8"	1.500"	1.6	250	-320 to 450	Not Rated	White	13125K87	91.14
2 1/2"	2.875"	2 7/8"	2.500"	1.6	250	-320 to 450	Not Rated	White	13125K88	113.32
Graphite-Filled PTFE with 302 Stainless Steel Spring
For 0.056" Wide Grooves
1/8"	0.188"	3/16"	0.125"	1.6	250	-320 to 450	Not Rated	Black	13125K71	79.43
For 0.101" Wide Grooves
1/8"	0.250"	1/4"	0.125"	1.6	250	-320 to 450	Not Rated	Black	13125K73	49.23
3/16"	0.313"	5/16"	0.188"	1.6	250	-320 to 450	Not Rated	Black	13125K74	47.00
1/4"	0.375"	3/8"	0.250"	1.6	250	-320 to 450	Not Rated	Black	13125K75	35.15
3/8"	0.500"	1/2"	0.375"	1.6	250	-320 to 450	Not Rated	Black	13125K76	40.21
For 0.149" Wide Grooves
3/16"	0.375"	3/8"	0.188"	1.6	250	-320 to 450	Not Rated	Black	13125K77	44.56
1/4"	0.438"	7/16"	0.250"	1.6	250	-320 to 450	Not Rated	Black	13125K78	49.08
3/8"	0.563"	9/16"	0.375"	1.6	250	-320 to 450	Not Rated	Black	13125K79	42.69
1/2"	0.688"	11/16"	0.500"	1.6	250	-320 to 450	Not Rated	Black	13125K91	41.83
3/4"	0.938"	15/16"	0.750"	1.6	250	-320 to 450	Not Rated	Black	13125K92	51.94
For 0.188" Wide Grooves
1/2"	0.750"	3/4"	0.500"	1.6	250	-320 to 450	Not Rated	Black	13125K93	61.16
3/4"	1.000"	1"	0.750"	1.6	250	-320 to 450	Not Rated	Black	13125K94	77.97
1"	1.250"	1 1/4"	1.000"	1.6	250	-320 to 450	Not Rated	Black	13125K95	65.06
1 1/4"	1.500"	1 1/2"	1.250"	1.6	250	-320 to 450	Not Rated	Black	13125K96	86.68
1 1/2"	1.750"	1 3/4"	1.500"	1.6	250	-320 to 450	Not Rated	Black	13125K13	82.71
2"	2.250"	2 1/4"	2.000"	1.6	250	-320 to 450	Not Rated	Black	13125K14	85.31
For 0.268" Wide Grooves
1 1/2"	1.875"	1 7/8"	1.500"	1.6	250	-320 to 450	Not Rated	Black	13125K97	121.87
2 1/2"	2.875"	2 7/8"	2.500"	1.6	250	-320 to 450	Not Rated	Black	13125K98	146.90

These are just a few of the sizes. And we can also custom the size of your requirements.

Please contact us to tell me your request.
A spring-energized seal consists of a high performance polymer sleeve and a finger spring. The polymeric sleeve has a U-shaped profile and it can be made of PTFE, PTFE Carbon, PTFE Graphite, PTFE Bronze or PTFE Glass. The finger spring can be a V-spring (meander spring), Helical spring or canted coil spring. The spring materials can be made of stainless steel, PEEK or Inconel.

This type of seal is capable of handling extreme service conditions, such as ultra-low friction, chemical compatibility and extreme temperature is required. The spring will energize the sealing lip even at low pressure and also at high pressure. It was designed especially for turbine engines, rockets, missiles, and also to serve the most challenging oil and gas applications.


Our sealing products factory is located in Hangzhou City, zhejiang Province. Founded in 2014, the company is a comprehensive sealing enterprise integrating sealing design, R & D, production, agency, storage and sales.  The company has seven companies and three field engineers who have been engaged in the sealing industry for some years. Excellent sealing design and development capability, advanced processing equipment and technology, high-quality imported raw materials (hydraulic reciprocating seal) and skeleton rotary seal; Products are widely used in: hydraulic and pneumatic construction machinery. Petrochemical Machinery and electronics. Electricity. Shipbuilding. papermaking. Coal mine pump valve and other fields

Our main products are: O-ring, X-ring, Y-ring, D-rings, rubber flat washer, ED rings, rubber strips, rubber ball, all kinds of skeleton oil seal, stepseal, polyurethane oilseal, pneumatic seals and Mechanical Seal all kinds of rubber parts for the design according to customer request.
 

we specialized in the development and production of sealing systems   which were used in the Metallurgical,Electrical,Auto, Engineering machinery, Light industrial machinery and Electrical appliance manufacturing industries. BESEALS focus on customers' needs,as a dependable partner and reliable supplier to help you resolve supply or technical problems ,and improve the performance of your equipments or your business. When you are facing emergency repairs situation or urgent orders,the highly responsive team of BEseals will offer you very short lead time. Beseals has a global sales network,and our seals have been sold to more than 100 countries or areas ,Such as America, England, Canada, Australia, Russian Federation ect .

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers?

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components

5. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ?

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.

 

7. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival