| Customization: | Available |
|---|---|
| Structure: | Single End |
| Pressure: | High Pressure Mechanical Seals |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Performance Capabilities:
|
Temperature
|
-30ºC to 200ºC, dependent on the elastomer
|
|
Pressure
|
Up to 10 bar
|
|
Speed
|
Up to 15 m/s
|
|
End play/axial float allowance
|
±0.1mm
|
|
Size
|
24mm-140mm/1"-5.625"
|
|
Brand
|
JR
|
|
Face
|
Carbon, SiC, TC
|
|
Seat
|
Ceramic, SiC, TC
|
|
Elastomer
|
NBR, EPDM, FKM etc.
|
|
Spring
|
SS304, SS316
|
|
Metal parts
|
SS304, SS316
|
|
Idividual Packing
|
Using foam and plastic paper wrapped, then put one piece of seal in one box,finally put in standard export carton.
|
Temperature:-30ºC-205ºC
Speed:<=20M/S
Pressure:<=1.5Mpa
Size:24mm-140mm/1"-5.625"
Rotary Face:CAR/SIC/TC
Stat Ring:SIC/TC
The type seal can replace with Johncrane type 4610 cartridge seal.
1,Optimized running face design
2,Non-clogging, crest-to-crest wave spring
3,Unique centralizing ring
4,Compact cartridge design
Recommended Applications:
1,Water and wastewater
2,Pulp and paper
3,Power generation
4,Chemical
5,Food and beverage
6,Pharmaceutical
7,Mining
8,Steel production
9,General industrial
This type seal is available off-the-shelf the world over, combines affordability with fluid-sealing dependability. It's the complete solution for sealing satisfaction in general industrial applications.
Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.
We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .
Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.
To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly you need, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.
){kind=link}