Curc Cartridge Mechanical Seals Repair Kit for Aesseal Pump Carbon Seal Tc Ring

• Structure: Single End
• Pressure: High Pressure Mechanical Seals
• Speed: High-Speed Mechanical Seal
• Temperature: Temperature Mechanical Seal
• Performance: Temperature
• Standard: Standard
• Model NO.: CURC Mechanical Seal Repair kit
• Type: HU1
• Balance: Balanced
• O Ring: Epr / Ffkm / FKM / Tfe/P
• Cartridge Sleeve: 316L Stainless Steel
• Springs: Alloy 276
• Rotating Drive Pins: Stainless Steel
• Rotating Face: 316L Ss - Carbon / Tc / Sic
• Stationary Face: Sic / Ceramic* / Tc / 316L Ss - Cr.Ox*
• Universal Pivot Ring: 316L Stainless Steel
• Gland Pins: Stainless Steel
• Gland: 316 Stainless Steel
• Restriction Bushing: Carbon
• Clamp Ring: 316L Stainless Steel
• Screws: Stainless Steel
• Radial Setting Clips: Brass
• Gasket: Af1 / Gft
• Transport Package: as Requirement
• Specification: As Requirement
• Trademark: BE
• Origin: Zhejiang
• HS Code: 8484200090
• Production Capacity: 1000000/Month

Product Description

CURC Cartridge Mechanical Seals Repair kit for Aesseal Pump Carbon Seal TC Ring
 

Single Mechanical Seal

The AESSEAL CURC™, CRCO™ and CURE™ mechanical seals are part of a range of seals specifically designed to optimize the use of Silicon Carbide.

All these seals incorporate improved third generation self aligning technology.
The design objective was to minimize metal to Silicon Carbide impact, particularly on start-up.

In some seal designs, impact between metal anti-rotation pins and Silicon Carbide can be sufficiently severe to induce stress cracking in the Silicon Carbide. Silicon Carbide has many advantages when used in mechanical seals.
The material has superior chemical resistance, hardness and heat dissipation properties compared to practically any other material used as a mechanical seal face.
Silicon Carbide is, however, brittle by nature, so the design of the self-aligning stationary in the CURC™ range of mechanical seals seeks to minimize this metal to Silicon impact on start-up.
 

Seal Size

24mm - 35mm

38mm - 60mm

63mm - 95mm

100mm-125mm

130mm-150mm

1.000" - 1.375"

1.500" - 2.375"

2.500" - 3.875"

4.000" - 5.000"

5.125" - 6.000"

Description	Material
Rotary O Ring	EPR / FFKM / FKM / TFE/P
Sleeve O Ring	EPR / FFKM / FKM / TFE/P
Cartridge Sleeve	316L Stainless Steel
Springs	Alloy 276
Rotating Drive Pins	Stainless Steel
Rotating Face	316L SS - Carbon / TC / SiC
Stationary Face	SiC / Ceramic* / TC / 316L SS - Cr.OX*

Stationary O Ring	EPR / FFKM / FKM / TFE/P
Universal Pivot Ring	316L Stainless Steel
Gland Pins	Stainless Steel
Gland	316 Stainless Stee
R'Bush O Ring	EPR / FFKM / FKM / TFE/P
Restriction Bushing	Carbon
Clamp Ring	316L Stainless Steel
Drive Screws	Stainless Steel

Clip Screws	Stainless Steel
Radial Setting Clips	Brass
Anti-Tamper Screws	Stainless Steel
Gasket	AF1 / GFT

ATEX Range Certifications

• CURC
  • Category 2 (Zone 1/21) & Category 3 (Zone 2/22)

Features:

• Self Aligning stationary face, maximizing seal life
• Stationary face with radial locating pins minimizes damage in stop / start applications with viscous fluids
• Quench flush and drain ports for cooling or heating options to maximize seal life
• CRCO™ lip seal option
• CURE™ secondary seal option
• ANSI+ gland options
• Bi-Metal option with exotic alloy wetted components for maximum versatility at minimum price premium
• Hydraulically balanced seal face technology for reduced power consumption
• Non-clogging rotaries and non shaft fretting elastomers
• Multiple spring and positive set screw shaft drive

Single Seals with Environmental Control Options

General service applications are efficiently sealed with an 'O' ring mounted, balanced, self-aligning seal. The SAI™, CS™, USI™ and NSI™ component seals and the SCUSI™ and Convertor II™ cartridge seals effectively seal all general service applications.

At the other end of the application spectrum, hazardous and dangerous products demand an engineered sealing approach. Double seals with closed-loop convection tank systems provide the necessary back-up protection.

Between these application extremes lie non-lubricating and/or non-hazardous fluids that alter their state with environmental changes.
A single seal, with an API type gland, provides temperature control and protection from atmospheric contact for these applications.

Secondary fluids introduced through the Quench and Drain ports to the atmospheric side of the seal faces, control the environment without dilution of the process fluid. Water, steam, grease, oil and other suitable barrier fluids can be used.

We are one of the largest Chinese professional designer and manufacturer various styles of mechanical seal.Graphite Gaskets Ring Seal Gasket We have first-class technology, professional engineer, advanced production equipment and inspection. Our main products include: O-ring mechanical seals, PTFE wedge mechanical seals, elastomer bellow shaft seals, metal bellow mechanical seals, cartridge seals and O.E.M seals, which are interchangeable to equivalent Bgm, JohnCrane, Aesseal,Vulcan, Roten. Besides that, we also manufacture and stock many thousands of specific pump seals:A.B.S,Alfa Ebara,EMU,Flygt,Fristam,Grundf, Hidrostal,Inoxpa,Lowara,Waukesha. We also can supply seal materials include Ceramic, carbon, silicon carbides, Ssic, tungsten carbides and various of stainless steel parts. Our products sell all over the world and get good feedback from our customers, please action now, we will supply competitive price, great after-sales service and quick response.
As Follows:

Our Warehouse

We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .

Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.

To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly you need, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers? 

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components 

5. How long is your delivery time? 

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ? 

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight. 

 

7. what services can we provide? 

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery; 

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY; 

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival