Emg1/75-G6 Asvgg Mechanical Seal Elastomer Bellows Seals for Pumps

• Customization: Available
• Structure: Single End
• Pressure: High Pressure Mechanical Seals
• Model NO.: EMG1/75-G6
• Type: HU1
• Balance: Balanced
• Seal Face: Carbon Graphite/Silicon Carbide
• Seat: Silicon Carbide/Tungsten Carbide
• Elastomer: NBR (P), EPDM (E), FKM (V), HNBR (X4)
• Metal Parts: Crnimo Steel (G), Hastelloy (M)
• Transport Package: as Requirement
• Specification: As Requirement
• Trademark: BE
• Origin: Zhejiang
• HS Code: 8484200090
• Production Capacity: 1000000/Month

Product Description

EMG1/75-G6 ASVGG Mechanical Seal Elastomer Bellows Seals for Pumps

MG1 on the market which can be used to seal, among other things, chemical pumps, water and waste water pumps, circulating pumps, and submersible motor pumps in numerous industrial sectors.

The eMG1 is 100 % compatible with the well-known MG1 standard seal. 
It has been innovated in detail and functionally expanded. 

A vastly reduced outer diameter of the bellows support now allows direct support by a retaining ring or with the use of much smaller spacer rings. 

The optimized bellows shape improves the automatic alignment of the bellows on the shaft and minimizes stick-slip effects. 

The characteristic innovative element is the profiled PEEK-PTFE disk which ensures consistent centering across the entire pressure operating range, exhibits outstanding sliding properties and safeguards the automatic alignment of the elastomer bellows in operation through continuous self-cleaning.

Our seals are high-qualified due to we strictly follow the DIN24960, ISO3069, EN12756, API628 standards.

Shaft Size	10-100mm
Material	Face: Carbon, SiC, TC Seat:  Ceramic, SiC, TC O-rings:NBR, EPDM, FKM Other Metal Parts : SS316, SS304
Temperature	-20°C to 300°C, dependent on the elastomer
Pressure	Up to 12 bar
Speed	Up to 12 m/s

eMG

Features

• For plain shafts
• Single and dual seal
• Elastomer bellows rotating
• Balanced
• Independent of direction of rotation

Advantages

• Identical with eMG1 but with approx.
  20 % shorter installation length


• Small outer diameter of bellows support (d_bmin) enables direct retaining ring support, or smaller spacer rings
• Optimal alignment characteristic through self-cleaning of disk/shaft
• Improved centering across entire pressure operating range
• No torsion on bellows
• Shaft protection over entire seal length
• Protection of seal face during installation due to special bellows design
• Insensitive to shaft deflections due to large axial movement ability

Operating range

Shaft diameter:
d1 = 14 … 110 mm (0.55" ... 4.33")
Pressure: p1 = 18 bar (261 PSI),
vacuum ... 0.5 bar (7.25 PSI),
up to 1 bar (14.5 PSI) with seat locking
Temperature:
t = -20 °C … +140 °C
(-4 °F … +284 °F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Admissible axial movement: ±2.0 mm (±0.08")

Materials

Seal face: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B), Silicon carbide (eSiC-Q7, Q1)
Seat: Silicon carbide (eSic-Q7, Q1), Tungsten carbide (U3)
Elastomer: NBR (P), EPDM (E), FKM (V),
HNBR (X4)
Metal parts: CrNiMo steel (G), Hastelloy® (M)

Recommended applications

• Fresh water supply
• Building services engineering
• Waste water technology
• Food technology
• Sugar production
• Pulp and paper industry
• Oil industry
• Petrochemical industry
• Chemical industry

• Water, waste water, slurries
  (up to 5 % by weight)
• Pulp (up to 4 % otro)
• Latex
• Dairies, beverages
• Sulfide slurries
• Chemicals
• Oils

• Chemical standard pumps
• Helical screw pumps
• Stock pumps
• Circulating pumps
• Submersible pumps
• Water and waste water pumps
  
  
  eMG1
  Dimensions, items and designations same as for eMG, but with an extended bellows tail to achieve the fitting length I.
  
  eMG12
  Dimensions, items and designations same as for eMG, but with an extended bellows tail to achieve the fitting length I_1k according to EN 12756 in combination with seat G6 or G60 (d_a exceeds EN 12756).
  
  eMG13
  Dimensions, items and designations same as for eMG, but with an extended bellows tail to achieve the fitting length I_1N according to EN 12756 in combination with seat G6 or G60 (d_a exceeds EN 12756).
  
  eRMG
  Identical to eMG, but with a special bellows surface on the shaft side. For use in hot water pumps.
  
  d1 = 14 … 38 mm (0.55" ... 1.50")
  Seat G6: Silicon carbide (eSiC-Q7)
  
  A/eSIC-Q7:
  120 °C (248 °F) and 25 bar (363 PSI) 140 °C (284 °F) and 16 bar (232 PSI)
  
  B/eSIC-Q7:
  120 °C (248 °F) and 18 bar (161 PSI)
  
  eSIC-Q7/eSIC-Q7:
  120 °C (248 °F) and 18 bar (161 PSI)

We offer products and services to a wide range of mechanical seal users across the nation. We supply electric motor and pump repair shops, HVAC contractors, municipalities, utility companies (electric, power and water) and a variety of other distributors.
As Follows:

We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .

Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.

To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly you need, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers?

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components

5. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ?

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.

 

7. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival