Auto Parts Automobile Crankshaft Oil Seal 90311-25032 99010 42045 3405035 90310-58003 11213-21020 21011 66021 66020 11214-75012 43204-6003 Rubber Hydraulic Seal

• Material: NBR, FKM, Sil, EPDM, HNBR, Cr, Acm, etc
• Usage: Engine, Transmission, Rear Axle
• Type: Oil Seal
• Speed: Speed
• Pressure: Pressure Type
• Lip: Lips Type
• Model NO.: Crankshaft Oil Seal
• Standard: Standard, Nonstandard
• Model Number: Standard
• Max Pressure: 0.05MPa
• Temp Range: -35~250
• Casing Type: Rubber Covered
• Series: Tb Tb2 Tc Tc4 Ta Tg Tg4 Sc SA Sb Sb2 Vb Vc Kc Kb
• Color: Black, Brown, Other
• Feature: High Temperature Resistance
• Hardness: 20~90 Shore
• Application: Aviation, Auto, Track, Motorcycle etc
• Transport Package: as Requirement
• Specification: Follow the instructions
• Trademark: BE
• Origin: China
• HS Code: 4016931000
• Production Capacity: 500000PCS/Month

Product Description

Auto Parts Automobile Crankshaft Oil Seal 90311-25032 99010 42045 3405035 90310-58003 11213-21020 21011 66021 66020 11214-75012 43204-6003 Rubber Hydraulic Seal

Description-Crankshaft Oil Seal:

The crankshaft oil seal is probably one of the most important things under your hood. 
Its main purpose is to seal the openings on either end of the crankshaft-the front and the rear. 
It also helps maintain the crankcase seal, and while it is made from durable material able to withstand pressure, heat, and oil, this seal will wear out over time.

Depending on which type you're dealing with, a replacement can be easy. The front crankshaft oil seal can be repaired with the right directions, but unless you have all the right equipment, it is advisable to have the rear crankshaft oil seal replaced by an auto mechanic.

Step 1 - Lift the Car
Before you begin you'll need to jack up the car. Use a lug nut wrench to remove the front wheel and place the jack stand under to support it.

Step 2 - Remove the Belt
Next, you need to remove the serpentine belt from the engine. Place a medium length breaker bar on the tensioner and lift. Pull the belt out from the alternator and pull it off the crankshaft to completely remove it.

Step 3 - Take Out the Splash Shield
The splash shield that houses the front crankshaft oil seal will have to come off as well. This is located inside the wheel well next to the engine. To remove it, start by pulling out the push pins on top. Then, use a panel remover to take out the center of the pin before you remove the rest. Once all the push pins are out, you can get remove the shield as well.

Step 4 - Take Out the Crankshaft Oil Seal
Remove the bolt holding the crank pulley; then, take out the bolts and the pulley itself. You should now be able to see the crankshaft.

Pry out the shield, which is the round ring-like metal situated on the center, using a screwdriver to get to the oil seal.

Step 5 - Insert New Seal
Before you make the replacement, check out how deep it goes to make sure that you are able to properly fit it with a new one. If it goes too deep for you to pull out, then you will want to take the vehicle to professional instead of continuing.

Once the old seal is out, slide the new one into place. Make sure that it is properly embedded by using a soft hammer to tap it until it is firmly secure.

Step 6 - Replace Everything
After you have placed the new crankshaft oil seal, you can put the shield back on and tighten it with the all the bolts you took out. Put back the splash shield and replace the push pins as well before you fit the serpentine belt where it belongs. Make sure that the bolts and the belt are properly placed before putting the wheel back in.

Other material of oil seal: Silicone, NBR, Metal & Stainless Steel, PTFE, etc.
Production equipment: includes vacuum vulcanizing machines, large-scale flat vacuum vulcanizing machines,
rubber machines, CNC machine tools, temperature-controlled ovens, and detectors.
Application High-pressure hydraulic seal auto rubber oil seal:
1. Fluid system (static & dynamic)
2. Hydraulic system (dynamic)
3. Pneumatic system (dynamic)
4. Oil or grease media sealing
5. Water media sealing
6. automobile, motorcycle, industry, agricultural machinery, truck, buses, trailers,
exercise equipment.
DLseals standard sizes of Galvanized Copper Washers metal gaskets Dowty seals Bonded Seals

Our sealing products factory is located in Hangzhou City, zhejiang Province. Founded in 2014, the company is a comprehensive sealing enterprise integrating sealing design, R & D, production, agency, storage and sales.  The company has seven companies and three field engineers who have been engaged in the sealing industry for some years. Excellent sealing design and development capability, advanced processing equipment and technology, high-quality imported raw materials (hydraulic reciprocating seal) and skeleton rotary seal; Products are widely used in: hydraulic and pneumatic construction machinery. Petrochemical Machinery and electronics. Electricity. Shipbuilding. papermaking. Coal mine pump valve and other fields

Our main products are: O-ring, X-ring, Y-ring, D-rings, rubber flat washer, ED rings, rubber strips, rubber ball, all kinds of skeleton oil seal, glyd ring and stepseal, polyurethane oilseal, pneumatic seals and Mechanical Seal all kinds of rubber parts for the design according to customer request.  

we specialized in the development and production of sealing systems   which were used in the Metallurgical,Electrical,Auto, Engineering machinery, Light industrial machinery and Electrical appliance manufacturing industries. BESEALS focus on customers' needs,as a dependable partner and reliable supplier to help you resolve supply or technical problems ,and improve the performance of your equipments or your business. When you are facing emergency repairs situation or urgent orders,the highly responsive team of DLseals will offer you very short lead time. Beseals has a global sales network,and our seals have been sold to more than 100 countries or areas ,Such as America, England, Canada, Australia, Russian Federation ect .

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers?

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components

5. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ?

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.

 

7. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival