M7n Mg1 Mg1s20 Mgss20 301-25 560A 560b 560c 560d Type 1 Water Pump Mechanical Seal for Rubber Ceramic Carbon Bellow Rotary Shaft Wave Spring Seal

• Structure: Single End
• Pressure: High Pressure Mechanical Seals
• Speed: High-Speed Mechanical Seal
• Temperature: Temperature Mechanical Seal
• Performance: Temperature
• Standard: Standard
• Model NO.: M7N MG1 MG1S20 301-25 560A 560B 560C TYPE 1
• Type: HU1
• Balance: Balanced
• Stationary Ring: Tc, Silicon Carbide
• Rotary Ring: Carbon, Silicon Carbide, Tc
• Secondary Seal: NBR, EPDM, Vit
• Spring and Metal Parts: Steel
• Transport Package: as Requirement
• Specification: As Requirement
• Trademark: BE
• Origin: Zhejiang
• HS Code: 8484200090
• Production Capacity: 1000000/Month

Product Description

M7n Mg1 Mg1s20 Mgss20 301-25 560A 560b 560c 560d Type 1 Water Pump Mechanical Seal for Rubber Ceramic Carbon Bellow Rotary Shaft Wave Spring Seal

M7N mechanical seal:

Advantages mechanical seal M7N.
Universal application opportunities.
Efficient stock keeping due to easily interchangeable faces.
Extended selection of materials.
Insensitive to low solids contents.
Flexibility in torque transmissions. Self cleaning effect. 

MG1 mechanical seal:

The MG1 can also be used as a multiple seal in tandem or in a back-to-back arrangement.
Installation proposals available upon request.
Dimension adaptations for specific conditions, e.g. shaft in inches or special seat dimensions are available upon request.

MG1S20 mechanical seal:

Dimensions, items and designations same as for MG1,
but with an extended bellows tail to achieve the special fitting length I1S in combination with seat G50.

301 mechanical seal:
 

Single-Spring Mechanical Seal 301 Replace Aesseal B01 Bgm Bt-Ar

Operations Conditions OF Water Pump Shaft Seal :

1. Structure: Single End
2. Pressure: Low Pressure Mechanical Seals
3. Speed: General Speed Mechanical Seal
4. Temperature: General Temperature Mechanical Seal
5. Performance: Wear
6. Standard: DIN24250
7. Model NO.: Type 301, BT-AR
8. Balance: Unbalanced
9. Specification: Inner Diameter: 6 mm to 60 mm
10. Temperature:-20ºC to +120ºC
11. Pressure:≤0.6MPa
12. Speed:≤10m/s

Materials Of Water Pump Shaft Seal:

• Structural Features: single end, unbalanced, independent direction of rotation, rubber bellow transmission. This component has a compact structure and it is easy to install. The bellow and the spring provide pressure compensation to the seal faces. The rubber bellow design prevents possible radial run-out so the floatabilitiy of the rotary ring is increased.
• Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded
• Rotary Ring:Q5,Resin Impregnated Carbon Graphite(Furan),Silicon Carbide Reaction Bonded
• Secondary Seal:Fluorocarbon Rubber(Viton),Nitrile(NBR),Ethylene Propylene(EPDM)
• Spring and Metal Parts:Stainless Steel
• Seat Types:
• Applications:Clean Water

 

Performance Capabilities:

 

Temperature	-30ºC to 200ºC, dependent on the elastomer
Pressure	Up to 6 bar
Speed	Up to 10 m/s
End play/axial float allowance	±0.1mm
Size	6mm to 70mm
Brand	JR
Face	Carbon, SiC, TC
Seat	Ceramic, SiC, TC
Elastomer	NBR, EPDM, VITON etc.
Spring	SS304, SS316
Metal parts	SS304, SS316
Packing Detail	1.From 8mm to 30mm is packed in plastic sheets grouply and M box. 2.From 32mm to 70mm is wrapped in plastic paper individually then grouply in M box. 3.Individual packing ,1 pc in 1 small box is available as well with cost of packing added.

• 301mechanical Seals Factory Direct Sale Pump Seal 301 SeriesMechanical Seals Water Seal
• Enclosed rubber bellows mechanical seal 301 (BT-AR)
• Equivalent to:
• Bgm BT-AR mechanical seal
• John Crane (Cyclam) PR/DR mechanical seal
• Flowserve 118 mechanical seal
• Latty T750 mechanical seal
• Roten 37B/ L5 mechanical seal
• Sterling BT mechanical seal
• Comonly used as the external seal in water cooled APV pumps

560ABCD mechanical seal:

560ABCD mechanical seal transmits torque through rubber bellows, simple structure, easy to operate,
suitable for all kinds of submersible pumps, sewage pumps and other general acid corrosive media.


TYPE 1 mechanical seal:

Elastomer Bellows mechanical seal Type1 is suitable for a wide range of service condition. 
Type 1 mechanical seal range is designed for universal application: pumps, mixers, air compressors, fans and other rotating equipment. 
It is frequently used in the pulp and paper, petrochemical, food processing, wastewater treatment, chemical processing and power generation industries.
 

We offer products and services to a wide range of mechanical seal users across the nation. We supply electric motor and pump repair shops, HVAC contractors, municipalities, utility companies (electric, power and water) and a variety of other distributors.We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly youneed, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.
As Follows:

Our Warehouse

We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .

Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.

To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly you need, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers? 

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components 

5. How long is your delivery time? 

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ? 

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight. 

 

7. what services can we provide? 

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery; 

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY; 

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival