Original Parker C1 5010 N8602 Piston Rod Seal for Hydraulic and Pneumatic Cylinders

• Customization: Available
• Material: NBR (Nitrile-Butadiene)
• Usage: Engine, Transmission, Rear Axle
• Model NO.: C1 5010 N8602
• Type: Rod Seal
• Speed: Speed
• Pressure: Pressure Type
• Lip: Lips Type
• Standard: Standard, Nonstandard
• Inside Diameter (mm): 50
• Maximum Working Temperature (C): 80
• Minimum Working Temperature (C): -50
• Outside Diameter (mm): 60
• Media: Hydraulic
• Polymer Material Options: NBR (Nitrile-Butadiene)
• Maximum Operating Pressure: 160 Bar
• Minimum Operating Temperature: -50 to -10
• Maximum Operating Temperature: 80 to 200
• Maximum Surface Speed: 0.5 M/Sec
• Unit of Measure: Length: mm
• Groove Width: 7.5
• Cushioning Mechanism: No
• Element Height (mm): 7
• Seal Material: N8602
• Transport Package: as Requirement
• Specification: Follow the instructions
• Trademark: BE
• Origin: China
• HS Code: 4016931000
• Production Capacity: 500000PCS/Month

Product Description

Original Parker C1 5010 N8602 Piston Rod Seal for Hydraulic and Pneumatic Cylinders

Description-Rod seal Prädifa series C1:
 

Rod seal Prädifa series C1

Part #: C15010N8602

Rod seal for hydraulic and pneumatic cylinders, single-acting, rubber u-cup design.

Technical Specifications

Inside Diameter (mm):	50
Maximum Working Temperature (C):	80
Minimum Working Temperature (C):	-50
Outside Diameter (mm):	60
Media:	Hydraulic
Polymer Material Options:	NBR (Nitrile-Butadiene)
Maximum Operating Pressure:	160 bar
Minimum Operating Temperature:	-50 to -10 °C
Maximum Operating Temperature:	80 to 200 °C
Maximum Surface Speed:	0.5 m/sec
Unit of Measure:	Length: mm
Groove Width:	7.5
Cushioning Mechanism:	No
Thermal Application Type:	Low Temperature (< -35 C) °C
Pressure Rating:	Low Pressure (< 160 bar) bar
Element Height (mm):	7
Seal Material:	N8602

The C1 rod seal is a U-ring with interference fit on the outer diameter. Excellent sealing performance is achieved with minimal profile width and height. Extremely low friction due to short seal contact area. Use in pneumatic equipment is only possible with constant lubricant supply, e.g. oiled air. For non-oiled (dry air) pneumatic systems, we recommend our E5 product series.

• Good wear resistance.
• Easy installation.
• High temperature resistance in case of suitable compound selection.
• Excellent media resistance in case of suitable compound selection.
• Suitable compounds available for special requirements of the chemical process industry.
• Suitable compounds available for special requirements of the food processing industry.
• Installation in closed and undercut housings.

Range of application:
The C1 rod seal is particularly suitable for plungers, piston rods, stems and valve lifters as well as for slowly operating pneumatic rotors (v ≤ 0.2 m/s).

The C1 rod seal is available in the following compounds:
E3676 - General purpose
E8790 - Drinking water
N3510 - Medium-duty
N3571 - Industrial applications
N8602 - Low temperatures
V3664 - High temperatures

Other material of oil seal: Silicone, NBR, Metal & Stainless Steel, PTFE, etc.
Production equipment: includes vacuum vulcanizing machines, large-scale flat vacuum vulcanizing machines,
rubber machines, CNC machine tools, temperature-controlled ovens, and detectors.
Application High-pressure hydraulic seal auto rubber oil seal:
1. Fluid system (static & dynamic)
2. Hydraulic system (dynamic)
3. Pneumatic system (dynamic)
4. Oil or grease media sealing
5. Water media sealing
6. automobile, motorcycle, industry, agricultural machinery, truck, buses, trailers,
exercise equipment.
DLseals standard sizes of Galvanized Copper Washers metal gaskets Dowty seals Bonded Seals

Our sealing products factory is located in Hangzhou City, zhejiang Province. Founded in 2014, the company is a comprehensive sealing enterprise integrating sealing design, R & D, production, agency, storage and sales.  The company has seven companies and three field engineers who have been engaged in the sealing industry for some years. Excellent sealing design and development capability, advanced processing equipment and technology, high-quality imported raw materials (hydraulic reciprocating seal) and skeleton rotary seal; Products are widely used in: hydraulic and pneumatic construction machinery. Petrochemical Machinery and electronics. Electricity. Shipbuilding. papermaking. Coal mine pump valve and other fields

Our main products are: O-ring, X-ring, Y-ring, D-rings, rubber flat washer, ED rings, rubber strips, rubber ball, all kinds of skeleton oil seal, glyd ring and stepseal, polyurethane oilseal, pneumatic seals and Mechanical Seal all kinds of rubber parts for the design according to customer request.  

we specialized in the development and production of sealing systems   which were used in the Metallurgical,Electrical,Auto, Engineering machinery, Light industrial machinery and Electrical appliance manufacturing industries. BESEALS focus on customers' needs,as a dependable partner and reliable supplier to help you resolve supply or technical problems ,and improve the performance of your equipments or your business. When you are facing emergency repairs situation or urgent orders,the highly responsive team of DLseals will offer you very short lead time. Beseals has a global sales network,and our seals have been sold to more than 100 countries or areas ,Such as America, England, Canada, Australia, Russian Federation ect .

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers?

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components

5. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ?

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.

 

7. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival