John Crane Dry Gas Cartridge Mechanical Seal Aura 120ns Type 28at 28XP 28XP 28st 28vl Compressor Shaft Seals for Kettles

• Customization: Available
• Structure: Double-End
• Pressure: High Pressure Mechanical Seals
• Model NO.: Dry Gas Mechanical Seal
• Speed: High-Speed Mechanical Seal
• Temperature: Temperature Mechanical Seal
• Performance: Temperature
• Standard: Standard
• Type: HU1
• Balance: Balanced
• Pressure Limits: up to 3625 Psi (G)/ 250 Bar(G)
• Speed Limits: up to 459fps/140m/S Measured at Balance Diameter
• Transport Package: as Requirement
• Specification: As Requirement
• Trademark: BE
• Origin: Zhejiang
• HS Code: 8484200090
• Production Capacity: 1000000/Month
• Package Size: 35.00cm * 35.00cm * 35.00cm
• Package Gross Weight: 10.000kg

Product Description

John Crane Dry Gas Cartridge Mechanical Seal Aura 120NS Type 28AT 28XP 28XP 28ST 28VL Compressor Shaft Seals for Kettles
 

Narrow Section Dry Gas Seal

narrow section gas seals enable the latest John Crane gas seal technology to be fitted into older equipment, bringing with it the benefits of non-contacting design. Gas seal technology eliminates the need for oil lubrication associated with contacting seals and the resulting need to address harmful emissions trapped in the oil.

Investing in retrofitting oil seals to dry gas seal solutions will increase the reliability of compressors and other rotating equipment. The narrow section design applies decades of retrofit experience to minimize upgrade costs and accelerate turnaround.

Oil and gas methane emissions are the second most important greenhouse gas source, accounting for ~18% of total climate human-related climate impact. Upgrading legacy compressors to dry gas seal technology can reduce methane emissions by up to 95 percent.

See the Economic Benefits of Retrofitting with Gas Seals and calculate the benefits using the John Crane Lifecycle Cost Calculator.

Features

Silicon carbide rotating and stationary sealing faces, spring-energized-polymer secondary sealing. This latest design delivers up to 120 bar static pressure with 42% reduced radial cross section and 25% reduced axial length to fit smaller compressor seal cavities.

Parameters

TEMPERATURE LIMITS
-58°F to 392°F/ -50°C to 200°C
SPEED LIMITS
up to 328fps/100m/s
SIZE LIMITS
73 mm to 155 mm / 2.87" to 6.10"
PRESSURE LIMITS
120bar

*If parameters fall outside of these ranges, contact us to speak to the technology department.
 

Recommended Applications

• Centrifugal compressors
• Other compressors
• IG Compressors
• Screw Compressors
• Turbo compressor machinery
• Natural gas pipeline
• Natural gas/hydrogen refueling stations
• Oil and gas (refineries)
• API692
• Propylene and ethylene compressor

We offer products and services to a wide range of mechanical seal users across the nation. We supply electric motor and pump repair shops, HVAC contractors, municipalities, utility companies (electric, power and water) and a variety of other distributors.Our seal products have been widely used in different sorts of pumps, including but not limited to chemical pumps, centrifugal pumps, high-temperature oil pumps, clean water pumps, circulating pumps, vacuum pumps, sewage pumps and slurry pumps. Beside for pumps, our seals also work with reaction kettles, submerged motors, compressors, blowers, paper-making equipment, sewage treatment equipment and other rotating machines.

As Follows:

We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .

Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.

To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly you need, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers?

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components

5. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ?

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.

 

7. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival