Mechanical Seal Mg1 Mg1s5 Mg1s20 Mg12 Mg13 560A 560b 560c 560d 301 Water Pump Bellow Rotary Shaft Rubber Ceramic Single Face Hydraulic O Ring Seal Pressure Seal

• Structure: Single End
• Pressure: High Pressure Mechanical Seals
• Speed: High-Speed Mechanical Seal
• Temperature: Temperature Mechanical Seal
• Performance: Temperature
• Standard: Standard
• Model NO.: MG1 MG1S5 MG1S20 560A 560B 560C 560D 301
• Type: HU1
• Balance: Balanced
• Stationary Ring: Tc, Silicon Carbide
• Rotary Ring: Carbon, Silicon Carbide, Tc
• Secondary Seal: NBR, EPDM, Vit
• Spring and Metal Parts: Steel
• Transport Package: as Requirement
• Specification: As Requirement
• Trademark: BE
• Origin: Zhejiang
• HS Code: 8484200090
• Production Capacity: 1000000/Month

Product Description

Mechanical Seal MG1 MG1S5 MG1S20 560A 560B 560C 560D 301 Water Pump Bellow Rotary Shaft Rubber Ceramic Single Face Hydraulic O Ring Seal Pressure Seal

MG1
Features

• For plain shafts
• Single and dual seal
• Elastomer bellows rotating
• Balanced
• Independent of direction of rotation
• No torsion on bellows

Advantages

• Shaft protection over entire seal length
• Protection of seal face during installation due to special bellows design
• Insensitive to shaft deflections due to large axial movement ability
• Universal application opportunities
• Important material certifications available
• High flexibility due to wide offer on materials
• Suitable for low-end sterile applications
• Special design for hot water pumps (RMG12) available
• Dimension adaptions and additional seats available

Operating range

Shaft diameter:
d1 = 10 … 100 mm (0.39" ... 3.94")
Pressure: p1 = 16 bar (230 PSI),
vacuum ... 0.5 bar (7.25 PSI),
up to 1 bar (14.5 PSI) with seat locking
Temperature: t = -20 °C … +140 °C
(-4 °F … +284 °F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Admissible axial movement: ±2.0 mm (±0,08")

Materials

Seal face: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B), Silicon carbide (Q1, eSiC-Q7)
Seat: Silicon carbide (Q1, eSic-Q7), Tungsten carbide (U3)
Elastomer: NBR (P), EPDM (E), FKM (V),
HNBR (X4)
Metal parts: CrNiMo steel (G), Hastelloy® (M)
Further materials upon request.

MG12
Dimensions, items and designations same as for MG1, but with an extended bellows tail to achieve the fitting length I_1k according to EN 12756 in combination with seat G6 or G60 (d_a exceeds EN 12756).
MG13
Dimensions, items and designations same as for MG1, but with an extended bellows tail to achieve the fitting length I_1N according to EN 12756 in combination with seat G6 or G60 (d_a exceeds EN 12756).
MG1S20
Dimensions, items and designations same as for MG1, but with an extended bellows tail to achieve the special fitting length I_1S in combination with seat G50.

560A&560B&560C

560A 560B 560C mechanical seal transmits torque through rubber bellows, simple structure, easy to operate, suitable for all kinds of submersible pumps, sewage pumps and other general acid corrosive media.

Style	Mechanical seal
Pressure	≤0.5Mpa
Speeds	≤ 10m/ sec
Standarsd or Nostandard	Standard
Temperature	-40ºC~125ºC
Spring&Other parts	SUS304
Rotary ring	carbon
Stationary ring	ceramic
Secondary seal	NBR
OEM	yes
Custom products	Accept custom
Sample	yes

560D
560D Single-Spring Mechanical Seal
Replace AESSEAL (replace NOK EAGLE ED560)

Operating Limits:
Pressure:   ≤0.3MPa
Speed:   ≤10 m/s
Temperature:   -30ºC~+200ºC
 
Rotary Ring(Plastic Carbon/Carbon/Sic/TC)
Stationary Ring(Ceramic/Sic/Tc)
Secondary Ring(nbr/Epdm/VITON)
Spring and Other Parts(Sus304/Sus316)

301

Single-Spring Mechanical Seal 301 Replace Aesseal B01 Bgm n Bt-Ar

 

Operations Conditions OF Water Pump Shaft Seal :

1. Structure: Single End
2. Pressure: Low Pressure Mechanical Seals
3. Speed: General Speed Mechanical Seal
4. Temperature: General Temperature Mechanical Seal
5. Performance: Wear
6. Standard: DIN24250
7. Model NO.: Type 301, BT-AR
8. Balance: Unbalanced
9. Specification: Inner Diameter: 6 mm to 60 mm
10. Temperature:-20ºC to +120ºC
11. Pressure:≤0.6MPa
12. Speed:≤10m/s

Materials Of Water Pump Shaft Seal:

• Structural Features: single end, unbalanced, independent direction of rotation, rubber bellow transmission. This component has a compact structure and it is easy to install. The bellow and the spring provide pressure compensation to the seal faces. The rubber bellow design prevents possible radial run-out so the floatabilitiy of the rotary ring is increased.
• Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded
• Rotary Ring:Q5,Resin Impregnated Carbon Graphite(Furan),Silicon Carbide Reaction Bonded
• Secondary Seal:Fluorocarbon Rubber(Viton),Nitrile(NBR),Ethylene Propylene(EPDM)
• Spring and Metal Parts:Stainless Steel
• Seat Types:
• Applications:Clean Water

 

Performance Capabilities:

 

Temperature	-30ºC to 200ºC, dependent on the elastomer
Pressure	Up to 6 bar
Speed	Up to 10 m/s
End play/axial float allowance	±0.1mm
Size	6mm to 70mm
Face	Carbon, SiC, TC
Seat	Ceramic, SiC, TC
Elastomer	NBR, EPDM, VITON etc.
Spring	SS304, SS316
Metal parts	SS304, SS316
Packing Detail	1.From 8mm to 30mm is packed in plastic sheets grouply and M box. 2.From 32mm to 70mm is wrapped in plastic paper individually then grouply in M box. 3.Individual packing ,1 pc in 1 small box is available as well with cost of packing added.

• 301mechanical Seals Factory Direct Sale Pump Seal 301 SeriesMechanical Seals Water Seal
• Enclosed rubber bellows mechanical seal 301 (BT-AR)
• Equivalent to:
• Bgm n BT-AR mechanical seal
• John Crane (Cyclam) PR/DR mechanical seal
• Flowserve 118 mechanical seal
• Latty T750 mechanical seal
• Roten 37B/ L5 mechanical seal
• Sterling BT mechanical seal
• Comonly used as the external seal in water cooled APV pumps

We offer products and services to a wide range of mechanical seal users across the nation. We supply electric motor and pump repair shops, HVAC contractors, municipalities, utility companies (electric, power and water) and a variety of other distributors.We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly youneed, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.
As Follows:

Our Warehouse

We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .

Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.

To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly you need, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers? 

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components 

5. How long is your delivery time? 

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ? 

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight. 

 

7. what services can we provide? 

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery; 

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY; 

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival