CDFI & CDFC Double Mechanical Seal Cartridge Seal Water Pump Seal
CDFI CDFC Cartridge Mechanical Seal For Chemical pumps
Features
- Integral deflector guides barrier fluid under faces and extends seal life
- Incorporates highly effective bi-directional pumping ring to maximise barrier flow and increase seal life
- Bi-Metal CDFI™ / CDFC™ options also include exotic allow wetted components at minimum price premium for use with corrosive chemicals
- Hydraulically balanced seal-face technology for reduced power consumption
- Non-shaft-fretting sleeve elastomer and positive set screw shaft drive
- Independant seal face design to enhance safe containment of process fluid in the event of damage to any individual sealing element
- Multiple spring seal face loading
- Sizes available from 1.125" to 5.000" (28mm - 125mm) in standard and ANSI Plus gland formats
Directed Barrier Fluid Circulation
Removing the heat at the inboard faces is critical for any double mechanical seal. The CDFI™ / CDFC™ directed barrier fluid flow path achieves effective heat removal at both sets of seal faces.
Bi-directional Barrier Fluid Circulation
Developed using the highly efficient patented DMSF™ pumping ring the CDFI™ will effectively and reliably circulate barrier fluid irrespective of the direction of shaft rotation.
Alternatively, in applications which use an external barrier fluid circulation device, such as a PUMPPAC™, or where fluid convection is required, the CDFC™ may be offered.
Fits in Thin Radial Cross Sectional Spaces
Like the CDSA™, the CDFI™ / CDFC™ can be installed on equipment with radial cross sectional spaces as small as 0.312" (8mm). This is typical on some smaller sized process pumps.
Double end, multiple springs, balanced, independent rotary direction, still structure, clamp transmission and cartridge seal. The compensation components are assembled into the flange and the elastomers protects the springs from the mediums to make sure the springs will not be jammed. Multiple springs make the loads on the seal faces balanced. The second end seal at the sealant side accomplish the second sealing and prevent the leakage of the mediums and sealants. The sleeve are supported by the elastomers on the shaft and there is no axial movement and no damage to the shaft. The seal faces are close to the rotor and have high cooling and lubrication efficiency. The special design of this seal can work with counter pressure and there are diversion trenches inside the flange so that the cooling effects are evenly distributed. This seal has to work with flush system and the sealant pressure should be 0.1 - 0.3 MPa and flow rate should be 3 - 8 L per minute.
We offer products and services to a wide range of mechanical seal users across the nation. We supply electric motor and pump repair shops, HVAC contractors, municipalities, utility companies (electric, power and water) and a variety of other distributors.Our seal products have been widely used in different sorts of pumps, including but not limited to chemical pumps, centrifugal pumps, high-temperature oil pumps, clean water pumps, circulating pumps, vacuum pumps, sewage pumps and slurry pumps. Beside for pumps, our seals also work with reaction kettles, submerged motors, compressors, blowers, paper-making equipment, sewage treatment equipment and other rotating machines.
As Follows:
We are always committed to the imported mechanical seals localization and have accumulated a wealth of experience .
Our product range includes Component Seals, Metal Bellow Seals, Cartridge Seals, Agitator seals, Dry Gas Seals and Split Seals.
To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Metal Bellow Mechanical Seals. To ensure you get what exactly you need, our professional team will help you work through all the details straight to your target. With our powerful team support, you would not have to worry about anything. Our company establishes the management system in strict accordance with the requirements of international standards and makes detailed after-sales service commitment.
1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.
4. why should you buy from us not from other suppliers?
Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components
5. How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
6.Do you provide samples ?
is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.
7. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese
For more information, please contact us. We look forward to your arrival
Audited Supplier 
){kind=link}
){kind=link}