Original Parker C22012n8613 C23015n8613 Piston Seal for Hydraulic and Pneumatic Cylinders

• Customization: Available
• Material: NBR
• Usage: Engine, Transmission, Rear Axle
• Model NO.: C22012N8613 C23015N8613
• Type: Oil Seal
• Speed: Speed
• Pressure: Pressure Type
• Lip: Lips Type
• Standard: Standard, Nonstandard
• Minimum Working Temperature: -50
• Maximum Working Temperature: 80
• Media: Hydraulic
• Cushioning Mechanism: No
• Polymer Material Options: Nitrile Butadiene Rubber (NBR, Xnbr)
• Maximum Operating Pressure: 160 Bar
• Minimum Operating Temperature: -50 to -5
• Maximum Operating Temperature: 80 to 200
• Maximum Surface Speed: 0.5 M/Sec
• Unit of Measure: Length: mm
• Thermal Application Type: Low Temperature (< -35 C)
• Pressure Rating: Low Pressure (< 160 Bar) Bar
• Seal Material: N8613
• Transport Package: as Requirement
• Specification: Follow the instructions
• Trademark: BE
• Origin: China
• HS Code: 4016931000
• Production Capacity: 500000PCS/Month

Product Description

Original Parker C22012N8613 C23015N8613 Piston Seal for Hydraulic and Pneumatic Cylinders


Piston seal Prädifa series C2
Part #: C22012N8613

Piston seal for hydraulic and pneumatic cylinders, single-acting, rubber u-cup design.

Technical Specifications

Media:	Hydraulic
Minimum Working Temperature (C):	-50
Maximum Working Temperature (C):	80
Inside Diameter (mm):	14
Outside Diameter (mm):	20
Polymer Material Options:	Nitrile Butadiene Rubber (NBR, XNBR)
Maximum Operating Pressure:	160 bar
Minimum Operating Temperature:	-50 to -5 °C
Groove Width:	4.7
Maximum Operating Temperature:	80 to 200 °C
Maximum Surface Speed:	0.5 m/sec
Unit of Measure:	Length: mm
Cushioning Mechanism:	No
Thermal Application Type:	Low Temperature (< -35 C) °C
Pressure Rating:	Low Pressure (< 160 bar) bar
Element Height (mm):	4.2
Seal Material:	N8613

Item Information

The C2 piston seal is a lip seal which sits tightly on the inner diameter. Although cross-sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact to the sealing surface area. For installation in non-lubricated pneumatic systems (dry air) we recommend our profile E4.

• Good wear resistance.
• Easier installation.
• Suitable for fully automatic installation.
• Assembly on one-part piston is possible.
• High temperature resistance in case of suitable compound selection.
• Excellent media resistance in case of suitable compound selection.
• Suitable compounds available for special requirements of the chemical process industry.
• Suitable compounds available for special requirements of the food processing industry.
• Installation in closed and undercut housings.

Range of application:
Particularly recommended for pistons in hydraulic and pneumatic cylinders.

Piston seal Prädifa series C2
Part #: C23015N8613

Piston seal for hydraulic and pneumatic cylinders, single-acting, rubber u-cup design.

Technical Specifications

Inside Diameter (mm):	20
Outside Diameter (mm):	30
Minimum Working Temperature (C):	-50
Media:	Hydraulic
Maximum Working Temperature (C):	80
Polymer Material Options:	Nitrile Butadiene Rubber (NBR, XNBR)
Maximum Operating Pressure:	160 bar
Minimum Operating Temperature:	-50 to -5 °C
Maximum Operating Temperature:	80 to 200 °C
Maximum Surface Speed:	0.5 m/sec
Unit of Measure:	Length: mm
Groove Width:	7.5
Cushioning Mechanism:	No
Thermal Application Type:	Low Temperature (< -35 C) °C
Pressure Rating:	Low Pressure (< 160 bar) bar
Element Height (mm):	7
Seal Material:	N8613

Item Information

The C2 piston seal is a lip seal which sits tightly on the inner diameter. Although cross-sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact to the sealing surface area. For installation in non-lubricated pneumatic systems (dry air) we recommend our profile E4.

• Good wear resistance.
• Easier installation.
• Suitable for fully automatic installation.
• Assembly on one-part piston is possible.
• High temperature resistance in case of suitable compound selection.
• Excellent media resistance in case of suitable compound selection.
• Suitable compounds available for special requirements of the chemical process industry.
• Suitable compounds available for special requirements of the food processing industry.
• Installation in closed and undercut housings.

Range of application:
Particularly recommended for pistons in hydraulic and pneumatic cylinders.

 

Our sealing products factory is located in Hangzhou City, zhejiang Province. Founded in 2014, the company is a comprehensive sealing enterprise integrating sealing design, R & D, production, agency, storage and sales.  The company has seven companies and three field engineers who have been engaged in the sealing industry for some years. Excellent sealing design and development capability, advanced processing equipment and technology, high-quality imported raw materials (hydraulic reciprocating seal) and skeleton rotary seal; Products are widely used in: hydraulic and pneumatic construction machinery. Petrochemical Machinery and electronics. Electricity. Shipbuilding. papermaking. Coal mine pump valve and other fields

Our main products are: O-ring, X-ring, Y-ring, D-rings, rubber flat washer, ED rings, rubber strips, rubber ball, all kinds of skeleton oil seal, glyd ring and stepseal, polyurethane oilseal, pneumatic seals and Mechanical Seal all kinds of rubber parts for the design according to customer request.

we specialized in the development and production of sealing systems   which were used in the Metallurgical,Electrical,Auto, Engineering machinery, Light industrial machinery and Electrical appliance manufacturing industries. BESEALS focus on customers' needs,as a dependable partner and reliable supplier to help you resolve supply or technical problems ,and improve the performance of your equipments or your business. When you are facing emergency repairs situation or urgent orders,the highly responsive team of BEseals will offer you very short lead time. Beseals has a global sales network,and our seals have been sold to more than 100 countries or areas ,Such as America, England, Canada, Australia, Russian Federation ect .

FAQ

1. who are we? Are you trading company or manufacturer ?
We are manufacturer.We are based in Hangzhou, China, start from 2010,sell to Domestic Market(33.00%),North America(15.00%),South America(10.00%),Western Europe(8.00%),Eastern Europe(6.00%),Souther Europe(6.00%),Southeast Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),Oceania(2.00%),South Asia(2.00%),Africa(00.00%),Eastern Asia(00.00%),Central America(00.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
PTFE Seals/Oil Seals/O Rings/Rubber Seals/Plastic Seals/Mechanical Seal/O-RING/ RING Seals.

4. why should you buy from us not from other suppliers?

Beseals is a professional manufacturer of seals .Our company specializes in the production of PU, PTFE, rubber and metal sealing components

5. How long is your delivery time?

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

6.Do you provide samples ?

is it free or extra ? Yes, we could offer the sample for free charge but you need to pay the cost of freight.

 

7. what services can we provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,Express Delivery;

Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,PayPal,Western Union,Escrow; Language
Spoken:English,Chinese,Japanese

For more information, please contact us. We look forward to your arrival